Clear Ip Ospf Statistics - Dell S6000 Reference Manual

Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1

clear ip ospf statistics

Clear the packet statistics in interfaces and neighbors.
S6000
Syntax
clear ip ospf [process-id] [vrf vrf-name] statistics [interface
name {neighbor router-id}]
Parameters
process-id
vrf vrf-name
statistics
interface name
neighbor
router-id
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
970
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
Enter the keyword vrf followed by the name of the VRF to
clear all OSPF routing tables corresponding to that VRF.
Enter the keyword statistics to clear the packet statistics in
interfaces and neighbors.
(OPTIONAL) Enter the keyword interface then one of the
following interface keywords and slot/port or number
information:
• For Port Channel groups, enter the keywords port-
channel then a number. For the C-Series and S-Series,
the range is from 1 to 128.
• For a SONET interface, enter the keyword sonet then the
slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from
1 to 4094.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
(OPTIONAL) Enter the keyword neighbor then the
neighbor's router-id in dotted decimal format (A.B.C.D.).
Open Shortest Path First (OSPFv2 and OSPFv3)