Show Ip Ospf Range; Show Ip Ospf Statistics - Dell PowerConnect 8024 Cli Reference Manual

show ip ospf range

Use the show ip ospf range command in Privileged EXEC mode to display information about
the area ranges for the specified area-id.
Syntax
show ip ospf range
area-id — Identifies the OSPF area whose ranges are being displayed. (Range: IP address or
•
decimal from 0–4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the area ranges for the specified area-id.
console#show ip ospf range 20
Area ID
-------
0.0.0.20 192.168.6.0 255.255.255.0 Summary Link Enabled

show ip ospf statistics

This command displays information about recent Shortest Path First (SPF) calculations. The
SPF is the OSPF routing table calculation. The output lists the number of times the SPF has
run for each OSPF area. A table follows this information. For each of the 15 most recent SPF
runs, the table lists how long ago the SPF ran, how long the SPF took, and the reasons why the
SPF was scheduled.
Syntax
show ip ospf statistics
776
OSPF Commands
area-id
IP Address Subnet Mask
---------- ---------
Lsdb Type Advertisement
--------- -------------