Lsp-Mtu - Dell S6000 Reference Manual

Command line for the system
Hide thumbs Also See for S6000:
Table of Contents

Advertisement

lsp-mtu

Set the maximum transmission unit (MTU) of IS-IS link-state packets (LSPs). This command only limits the
size of LSPs this router generates.
S6000
Syntax
lsp-mtu size
To return to the default values, use the no lsp-mtu command.
Parameters
size
Defaults
1497 bytes.
Command
ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 7.5.1.0
Usage
The link MTU and the LSP MTU size must be the same.
Information
Because each device can generate a maximum of 255 LSPs, consider carefully
whether you use the lsp-mtu command.
828
The maximum LSP size, in bytes. The range is from 128 to
1497 for Non-Jumbo mode and from 128 to 9195 for Jumbo
mode. The default is 1497.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added support for LSP Throttling Enhancement.
Intermediate System to Intermediate System (IS-IS)

Advertisement

Table of Contents
loading

Table of Contents