Show System Mtu - Dell N1100-ON Reference Manual

Table of Contents

Advertisement

Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example identifies test as the protected group.
console#show switchport protected 0
Name......................................... test

show system mtu

Use the show system mtu command to display the configured MTU. The
MTU is set using the global system jumbo mtu command. This command
deprecates the show interfaces mtu command.
Syntax
show system mtu
Default Configuration
The default mtu size is 1518 bytes (1522 bytes for VLAN tagged frames).
Command Modes
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no usage guidelines.
Example
console #show system mtu
421
Layer 2 Switching Commands

Advertisement

Table of Contents
loading

This manual is also suitable for:

N1500N3100-onN4000N2100-onN2000N3000

Table of Contents