018-400 Ipsec Error (Configuration Mismatch) Rap; 018-500 Ca Message Receiver Boot Error (S_Cert Lost) Rap - Xerox WorkCentre 5222 Service Manual

018-400 IPSEC Error (Configuration Mismatch) RAP

While IPSEC is set to Enable, password is not set in authentication mode= [Pre-shared key] or
IPSEC certificate is not set in authentication mode= [Digital signature].
Procedure
Make IPSEC setting consistent and enable IPSEC again. Inconsistency in IPSEC setting: Pass-
word is not set with Authentication mode= [Pre-shared Key] or Authentication mode= IPSEC certifi-
cate is not set with [Digital signature]. To set these items which are not set.
Launch Version
WorkCentre 5225, 5230
018-500 CA Message Receiver Boot Error (S_cert lost)
RAP
Job cannot be executed with designated combination of parameters (storage file size, paper size,
paper tray, Duplex designation, output tray).
Procedure
Re-set paper size, paper tray, Duplex designation and output tray etc. and retry job.
February, 2008
2-261
Status Indicator Raps
018-400, 018-500