Master Cylinder Removal
1. Locate the master cylinder
in the wheel well area.
2. Remove the clip
attaches the master cylinder to the brake pedal lever.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
above the left front tire
from the clevis pin
© Copyright 2014 Polaris Industries Inc.
3. Place a container to catch brake fluid under the
master cylinder brake line banjo bolts
Brake fluid will damage finished surfaces.
Do not allow brake fluid to come in contact
with finished surfaces.
NOTE: Make note of front and rear brake line
locations to master cylinder.
4. Loosen the brake line banjo bolts and allow fluid to
NOTE: Dispose of fluid properly. Do not re-use.
5. Remove the two mounting fasteners
the master cylinder to the frame.