Polaris RZR XP 1000 Service Manual page 268

TRANSMISSION
10. Torque left side mounting bolts to specification in
sequence.
11. Torque right side mounting bolts to specification
using the numbered sequence shown.
Engine / Transmission Mounting Bolts:
Step 1-2: 64 ft-lb (87 Nm)
Step 3: 5 ft-lb (7 Nm)
Step 4-7: 44 ft-lb (60 Nm)
12. Remove the clutch center distance tool.
6.10
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
13. Remove the spacer or support between the vehicle
frame and engine.
14. Install and properly route the gear position switch
connector , speed sensor connector
position sensor connector
bracket bolts , shift cable clevis pin and washer
onto the transmission.
15. Torque the two shift cable bracket bolts to
specification.
Shift Cable Bracket Bolts:
17 ft-lb (23 Nm)
, crankshaft
, shift bracket and shift
9