ENGINE / COOLING SYSTEM
Crankcase Disassembly / Inspection
1. Remove the oil cooler
2. Remove the crankcase drain plug
remaining in the engine.
3. Remove the oil filter.
4. Install the Cylinder Holding & Camshaft Timing Plate
(PU-50563)
onto the cylinder. The cylinder holding
tool retains the cylinder and pistons when the engine
is rotated.
3.48
from the crankcase.
1
. Drain any oil
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
5. Rotate engine to access the crankcase sump cover.
6. Remove the thirteen M6
retaining the sump cover
7. Remove the sump cover
8. Remove and clean oil pump pick-up
9. Remove the three bolts
to the crankcase.
and three M8 bolts
to the crankcase.
from the crankcase.
.
that retain the oil pump
9
10