3. Install upper rail with end gap positioned on the
exhaust side of piston.
4. Install second ring with marking facing top of piston.
Rotate ring to position the end gap toward intake
side of piston as shown below.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
5. Install top ring with mark facing top of piston. Rotate
6. Be sure top and second rings rotate freely in their
© Copyright 2014 Polaris Industries Inc.
ENGINE / COOLING SYSTEM
ring to position the end gap toward exhaust side of
piston as shown below.
grooves and do not bind when compressed by hand.