11. Pull out the clutch roller pins
12. Press the shaft and bearing out of the outer sheave
using an arbor press.
13. Inspect the bearing
the bearing does not spin smoothly, replace it. To
replace the bearing, remove the snap ring
the end of the shaft and press the bearing off the
for wear. Spin the bearing, if
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
14. Inspect the cam (helix) assembly bushing
wear. If the bushing is worn or the shaft does not fit
snug into the bushing, replace the cam (helix)
15. Inspect the sheaves for excessive wear or damage.