Rear Prop Shaft Installation - Polaris RZR XP 1000 Service Manual

Hide thumbs Also See for RZR XP 1000:
Table of Contents


7. Slide the prop shaft to the rear of the vehicle until the
front of the shaft clears the frame support and slide
the prop shaft forward out of the vehicle.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
Rear Prop Shaft Installation XP 4
1. Reverse the appropriate Rear Prop Shaft Removal
2. Lubricate the transmission output shaft splines with
3. Lubricate the front and rear prop shaft mid joint with
4. Align the front and rear prop shafts and slide them
5. Torque the support bearing fasteners to specification.
© Copyright 2014 Polaris Industries Inc.
XP 4, page 7.26 procedure to reinstall the rear prop
Polaris All Purpose Grease.
Polaris All Purpose Grease.
NOTE: Paint marks are applied to the front and
rear propshafts to aid shaft alignment. Reference
these marks during installation if still visible.
Support Bearing Fasteners:
35 ft-lb (47 Nm)


Table of Contents

Subscribe to Our Youtube Channel

This manual is also suitable for:

Rzr xp4 1000

Table of Contents

Save PDF