FRONT PROPSHAFT SERVICE
Front Propshaft Removal
1. Remove the center console.
Cap
1
Shifter
2. Locate the prop shaft roll pin and use the Roll Pin
Removal Tool (PN 2872608) to remove the roll pin.
Discard roll pin. Push the front prop shaft rearward to
remove it from the front gearcase input shaft.
Roll Pin Removal Tool:
PN 2872608
NOTE: Right front wheel can be removed to gain
better access to the propshaft roll pin.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
Torx Screw
Push Rivet
© Copyright 2014 Polaris Industries Inc.
3. Slide the front propshaft
and remove it from the vehicle.
4. Proceed to Front Prop Shaft Installation, page 7.24.
FINAL DRIVE
off the rear propshaft
7
7.23
Need help?
Do you have a question about the RZR XP 1000 and is the answer not in the manual?
Questions and answers