Master Cylinder; Master Cylinder Removal - Polaris RZR XP 1000 2014 Service Manual

MASTER CYLINDER

MASTER CYLINDER REMOVAL

1. Locate the master cylinder
in the wheel well area.
w
2. Remove the clip from the clevis pin
attaches the master cylinder to the brake pedal lever.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
q
above the left front tire
e
that
3. Place a container to catch brake fluid under the
master cylinder brake line banjo bolts
CAUTION
Brake fluid will damage finished surfaces. Do not allow
brake fluid to come in contact with finished surfaces.
NOTE
Make note of front and rear brake line locations to
master cylinder.
4. Loosen the brake line banjo bolts and allow fluid to
drain.
NOTE
Dispose of fluid properly. Do not re-use.
5. Remove the two mounting fasteners
the master cylinder to the frame.
BRAKE SYSTEM
r
.
t
that secure
9
9.7