BRAKE SYSTEM
MASTER CYLINDER SERVICE
MASTER CYLINDER REMOVAL
1. Remove retaining clip
attaches the master cylinder to the brake pedal lever.
2. Remove the two mounting bolts
master cylinder to the frame.
3. Remove master cylinder and place a fluid catch
container under the master cylinder brake lines.
Brake fluid will damage finished surfaces.
Do not allow brake fluid to come in contact with finished
surfaces.
10.12
q
w
from the clevis pin
e
that secure the
CAUTION
4. Loosen the brake line banjo bolt
t
allowing the fluid to drain.
that
Tractor models will have two pressure switches, and
ABS models will have no pressure switches located on
5. Discard seals and replace upon assembly.
Make note of front and rear brake line orientation on the
6. Dispose of brake fluid properly and DO NOT re-use.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
r
and brake switch
NOTICE
the master cylinder.
NOTICE
master cylinder.
© Copyright Polaris Inc.