17. Install dowel pins
into oil pump mounting holes.
18. Install the three bolts
crankcase. Torque mounting bolts to specification.
Oil Pump Mounting Bolts:
7 ft-lbs (10 Nm)
19. Reinstall oil pump pick-up
screws to specification.
Oil Pump Pick-Up Retaining Screws:
7 ft-lb (10 Nm)
20. Clean the gasket sealing surfaces on oil sump cover
and crankcase to remove old gasket material and
NOTE: Gasket surfaces must be DRY and oil
free. Use care upon assembly to keep oil away.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
that retain oil pump
. Torque mounting
© Copyright 2014 Polaris Industries Inc.
ENGINE / COOLING SYSTEM
21. Apply a thin, continuous film of Crankcase Sealant
(PN 2871557) to sump cover mating surface
shown. Do not allow sealant to dry before assembly.
22. Install the oil sump cover
23. Install the thirteen M6
retain the oil sump cover
onto the crankcase.
and three M8 bolts that
to the crankcase.