Download Print this page

Polaris RZR XP 1000 Service Manual page 128

Hide thumbs

Advertisement

Table of Contents
ENGINE / COOLING SYSTEM
6. Remove the cam chain
and PTO main seal
7. Inspect the crankshaft gear
for broken or worn teeth.
8. If the crankshaft gear or sprocket is damaged, the
crankshaft assembly must be replaced.
3.52
, oil pump drive chain
from the crankshaft.
and auxiliary sprocket
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
9. Support crankshaft on V-blocks or on-centers in a
crankshaft stand or lathe. Measure crankshaft run-
out and replace if run-out exceeds maximum listed
below.
Crankshaft Maximum Runout:
Less than 0.001" (0.025 mm)
10. Visually inspect surface of crankshaft main and
connecting rod journals. Replace crankshaft if any
journal is scratched or pitted.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rzr xp4 1000