Download Print this page

Polaris RZR XP 1000 Service Manual page 249

Hide thumbs

Advertisement

Table of Contents
5. Press down on the top of the spider assembly,
pushing the spider onto the shaft. Remove snap ring
and slowly release the assembly.
6. Remove the spider assembly and spring
NOTE: Spring is compression only and has no
torsional wind.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
7. Remove the inside spider plate
8. Remove the E-clips
.
9. Remove the clutch assembly from the holding tool.
10. Press out the spring pins
© Copyright 2014 Polaris Industries Inc.
dampener
. Inspect the spider dampener for wear
and replace if needed.
, washers
rollers
. Inspect the rollers for wear; replace if worn.
9
PVT SYSTEM
and spider
, and the clutch
in the inner sheave.
5.29
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rzr xp4 1000