Polaris RZR XP 1000 Service Manual page 185

Hide thumbs Also See for RZR XP 1000:

Table of Contents

3. With the ignition turned off, disconnect the wire

harness from the ECU. Lift the connector locking

lever and rotate it up until the connector is free from

NOTE: Upon removing the ECU connector, you

should hear a "click" when the connector is fully

4. To install, reverse the procedure and tighten the

mounting screws to specification.

NOTE: Upon installing the ECU connector, you

should hear a "click" when the connector is fully

ECU Retaining Screws:

24 in-lb (3 Nm)

9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual

Chapters

Table of Contents

Do you have a question about the RZR XP 1000 and is the answer not in the manual?

Rzr xp4 1000