Digital Wrench® Diagnostic Software - PU-47063-B
This dealer-only software installs on laptop computers
equipped with a CD drive and is designed to replace
multiple shop tools often used to test EFI components. It
also includes step-by-step diagnostic procedures to aid
technician repair and troubleshooting.
NOTE: If the PC you are using is not equipped with
a 9-pin serial port, a USB to serial port adapter will
be necessary. A USB to serial port adapter can be
purchased through Bosch Automotive Service
Solutions (PU-50621) or DSA at: www.diagsys.com
Digital Wrench® SmartLink Module Kit - PU-47471
This module kit contains the necessary cables and
hardware to communicate between the vehicle ECU and
the Digital Wrench® diagnostic software. Polaris dealers
can also order the following kit components separately:
SmartLink Module PU-47468, Vehicle Interface Cable
PU-47469 and PC Interface Cable PU-47470. This
module kit is used on all 8 pin connector-based Polaris
EFI systems. This kit is available to Polaris dealers
through our tool supplier Bosch at http://polaris. service-
solutions.com or (1-800-345-2233).
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
Digital Wrench® - Diagnostic Connector
Located under the hood connected to a sealed plug.
Digital Wrench® - Download Website
Located at: www.polaris.diagsys.com
Download Digital Wrench® Updates:
NOTE: For the most recent information on Digital
Wrench® software and update downloads please
visit the website: www.polaris.diagsys.com