Show Range - Dell PowerEdge M I/O Aggregator Reference Manual

Example
Related
Commands

show range

Syntax
Command Mode
Command
History
152 | Interfaces
Figure 11-27. show interfaces switchport Command Example
FTOS#show interfaces switchport
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT
tagged
Name: TenGigabitEthernet 1/1
802.1QTagged: Hybrid
IO-AGG port mode: Auto VLANs enabled
Vlan membership:
Q Vlans
U 1
T 2-4094
Native VlanId: 1.
Name: TenGigabitEthernet 1/2
802.1QTagged: Hybrid
IO-AGG port mode: Auto VLANs enabled
Vlan membership:
Q Vlans
U 1
T 2-4094
Native VlanId: 1.
--More--
Table 11-8. Items in show interfaces switchport Command Example
Items
Name
802.1QTagged
Vlan membership
show ip interface
Displays all interfaces configured using the
show range
INTERFACE RANGE (config-if-range)
Version 8.3.17.0 Supported on M I/O Aggregator
Description
Displays the interface's type, slot and port number.
Displays whether if the VLAN tagged ("True"), untagged ("False"), or hybrid
("Hybrid"), which supports both untagged and tagged VLANs by port 13/0.
Lists the VLANs to which the interface is a member. Starting with FTOS 7.6.1,
this field can display native VLAN membership by port 13/0.
Displays Layer 3 information about the interfaces.
group command.