Show Ip Bgp Ipv4 Extcommunity-List - Dell Z9500 Reference Manual

Defaults none
Command ROUTE MAP (config-route-map)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
7.6.1.0
Usage
If the set community rt and soo are in the same route-map entry, the behavior
Information
defines as:
•
•
•
Related set extcommunity rt
Commands map.

show ip bgp ipv4 extcommunity-list

To display the IPv4 routes matching the extended community list name, use this feature.
Z9500
Syntax
show ip bgp [ipv4 [multicast | unicast] | ipv6 unicast]
extcommunity-list name
Parameters
multicast
unicast
ipv6 unicast
Border Gateway Protocol
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
If the rt option comes before soo, with or without the additive option, soo
overrides the communities rt sets.
If the rt option comes after soo, without the additive option, rt overrides
the communities soo sets.
If the rt with the additive option comes after soo, rt adds the communities
soo sets.
— sets the extended community route origins using the route-
Enter the keyword multicast to display the multicast route
information.
Enter the keyword unicast to display the unicast route
information.
Enter the keywords ipv6 unicast to display the IPv6
unicast route information.
473