Defaults
The IP address on the system that is closest to the Telnet address is used in the
outgoing packets.
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
8.2.1.0
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
ip ftp username
Assign a user name for outgoing FTP connection requests.
C9000 Series
Syntax
ip ftp username username
To return to anonymous FTP connections, use the no ip ftp username
[username] command.
Parameters
username
•
For a tunnel interface, enter the keyword tunnel.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Increased number of VLANs on ExaScale to 4094 (was 2094).
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
Enter a text string as the user name up to 40 characters long.
Control and Monitoring
97