Atm Framing - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

atm framing

atm framing framingType
Syntax
no atm framing
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures T3 or E3 framing on an ATM interface. The no version returns framing
Description
to the default. For a T3 interface, the default value is cbitplcp. For an E3 interface,
the default value is g751plcp.
Options
Interface Configuration
Mode
172
atm framing
framingType One of the following:
cbitadm c-bit with ATM direct mapping for a DS3 (T3) interface
cbitplcp c-bit with PLCP framing for a DS3 (T3) interface (default for T3)
g832adm G.832 ATM direct mapping for an E3 interface
g751adm G.751 ATM direct mapping for an E3 interface
g751plcp G.751 PLCP mapping for an E3 interface (default for E3)
m23adm M23 ATM direct mapping for a DS3 (T3) interface
m23plcp M23 with PLCP framing for a DS3 (T3)