Port Link-Type Hybrid - H3C S7500E Series Command Reference Manual

View
OLT port view
Default Level
2: System level
Parameters
vlan-id-list: VLANs that the hybrid ports will be assigned to. This argument is expressed in the format of
[ vlan-id1 [ to vlan-id2 ] ]&<1-10>, where vlan-id ranges from 1 to 4094 and &<1-10> indicates that you
can specify up to 10 VLAN IDs or VLAN ID ranges. Be sure that the specified VLANs already exist.
tagged: Configures the hybrid port to send the packets of the specified VLAN(s) with the tags kept.
untagged: Configures the hybrid port to send the packets of the specified VLAN(s) with the tags
removed.
Description
Use the port hybrid vlan command to assign the current hybrid port to the specified VLAN(s).
Use the undo port hybrid vlan command to remove the current hybrid port from the specified
VLAN(s).
By default, a hybrid port only allows packets from VLAN 1 to pass through untagged.
A hybrid port can carry multiple VLANs. If you execute the port hybrid vlan command multiple times,
the VLANs the hybrid port carries are the set of VLANs specified by vlan-id-list in each execution.
Related commands: port link-type hybrid, port hybrid pvid vlan.
If QinQ is enabled on the current OLT port, the port removes the outer VLAN tag of packets in its
outbound direction. In this case, you need to choose the untagged keyword for the port hybrid
vlan command.
If QinQ is not enabled on the current OLT port, the port keeps the outer VLAN tag of packets in its
outbound direction. In this case, you need to choose the tagged keyword for the port hybrid vlan
command.
Examples
# Assign the hybrid port OLT 3/0/1 to VLAN 2, VLAN 4, and VLAN 50 through VLAN 100, and configure
OLT 3/0/1 to send packets of these VLANs with tags kept.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] port link-type hybrid
[Sysname-Olt3/0/1] port hybrid vlan 2 4 50 to 100 tagged

port link-type hybrid

Syntax
port link-type hybrid
View
OLT port view
2-26