Display Mobility-Domain Status - 3Com WX4400 Command Reference Manual

272 C 9: M
HAPTER OBILITY
display
mobility-domain
status
D C
OMAIN OMMANDS
On the seed WX, displays the Mobility Domain status and members.
Syntax —

display mobility-domain status

Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To display Mobility Domain status, type the following
command:
WX4400# display mobility-domain status
Mobility Domain name:
Member
---------------
192.168.253.11
192.168.253.12
192.168.253.14
Table 45 describes the fields in the display.
Table 45 display mobility-domain Output
Field
Mobility Domain
name
Member
State
Status
See Also
clear mobility-domain on page 270
set mobility-domain member on page 273
set mobility-domain mode member seed-ip on page 274
Pleasanton
State
-------------
STATE_UP
STATE_DOWN
STATE_UP
Description
Name of the Mobility Domain
IP addresses of the seed WX switch and members in the
Mobility Domain
State of the WX switch in the Mobility Domain:
STATE_UP
STATE_DOWN
Role of the WX switch in the Mobility Domain:
MEMBER
SEED
Status
--------------
MEMBER
MEMBER
SEED