Advertising A Default Route To A Peer Or Peer Group; Configuring Bgp Route Distribution Policy - 3Com MSR 50 Series Configuration Manual

844 C 56: BGP C
HAPTER ONFIGURATION
Advertising a Default
Route to a Peer or Peer
Group
n
Configuring BGP Route
Distribution Policy
To do...
Configure BGP Configure automatic
route route summarization
summarization
Configure manual
route summarization
To advertise a default route to a peer or peer group, use the following commands:
To do...
Enter system view
Enter BGP view
Advertise a default route to a
peer or peer group
With the peer default-route-advertise command executed, the router sends a
default route with the next hop being itself to the specified peer/peer group,
regardless of whether the default route is available in the routing table.
To configure BGP route distribution policy, use the following commands:
To do...
Enter system view
Enter BGP view
Use the command...
summary automatic
aggregate ip-address
{ mask | mask-length }
[ as-set |
attribute-policy
route-policy-name |
detail-suppressed |
origin-policy
route-policy-name |
suppress-policy
route-policy-name ]*
Use the command...
system-view
bgp as-number
peer { group-name |
ip-address }
default-route-advertise
[ route-policy
route-policy-name ]
Use the command...
system-view
bgp as-number
Remarks
Required
No route summarization
is configured by default
Choose either as needed;
if both are configured,
the manual route
summarization takes
effect.
Remarks
-
-
Required
Not advertised by default
Remarks
-
-