Clear Network-Domain Peer - 3Com WX4400 Command Reference Manual

280 C 10: N
HAPTER ETWORK
clear
network-domain
peer
D C
OMAIN OMMANDS
Removes the configuration of a Network Domain peer from a WX switch
configured as a Network Domain seed.
Syntax —
clear network-domain peer {ip-addr | all}
— IP address of the Network Domain peer in dotted decimal
ip-addr
notation.
— Clears the Network Domain peer configuration for all peers
all
from the WX switch.
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.1.
Usage — This command has no effect if the WX switch is not configured
as a Network Domain seed.
Examples — The following command clears the Network Domain peer
configuration for peer 192.168.9.254 from the WX switch:
WX1200# clear network-domain peer 192.168.9.254
success: change accepted.
The following command clears the Network Domain peer configuration
for all peers from the WX switch:
WX1200# clear network-domain peer all
success: change accepted.
See Also
set network-domain peer on page 285