Clear Ip Route - 3Com WX4400 Command Reference Manual

134 C 7: IP S
HAPTER

clear ip route

C
ERVICES OMMANDS
See Also
clear ip dns domain on page 133
display ip dns on page 148
set ip dns on page 168
set ip dns domain on page 169
set ip dns server on page 170
Removes a route from the IP route table.
Syntax —
clear ip route {default | ip-addr mask |
ip-addr/mask-length} gateway
— Default route.
default
default is an alias for IP address 0.0.0.0/0.
ip-addr mask
destination, in dotted decimal notation (for example, 10.10.10.10
255.255.255.0).
ip-addr/mask-length
format (for example, 10.10.10.10/24).
gateway — IP address, DNS hostname, or alias of the next-hop router.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command removes the route to destination
10.10.10.68/24 through gateway router 10.10.10.1:
WX1200# clear ip route 10.10.10.68/24 10.10.10.1
success: change accepted.
See Also
display ip route on page 150
set ip route on page 171
— IP address and subnet mask for the route
— IP address and subnet mask length in CIDR