Enabling/Disabling Ftp Server; Configuring The Ftp Server Authentication And Authorization - 3Com 400 Family Configuration Manual

222 C 12: F S
HAPTER ILE YSTEM
Enabling/Disabling FTP
Server
Configuring the FTP
Server Authentication
and Authorization
M
ANAGEMENT
Table 243 Configuration of the Switch as FTP Client
Device Configuration
Default Description
Switch Log into the remote FTP server directly with the ftp command.
-- You need first get FTP user command and password, and then log into the
remote FTP server. Then you can get the directory and file authority.
PC Start FTP server and make such settings as username, password, authority.
-- --
Table 244 Configuration of the Switch as FTP Server
Device Configuration
Switch Start FTP server.
Configure authentication and
authorization for FTP server.
Configure running parameters for
FTP server.
PC Log into the Switch from FTP client.
The prerequisite for normal FTP function is that the Switch and PC are reachable.
You can use the following commands to enable/disable the FTP server on the
Switch. Perform the following configuration in System View.
Table 245 Enable/Disable FTP Server
Operation
Enable the FTP server
Disable the FTP server
FTP server supports multiple users to access at the same time. A remote FTP client
sends request to the FTP server. Then, the FTP server will carry out the
corresponding operation and return the result to the client.
By default, FTP server is disabled.
You can use the following commands to configure FTP server authentication and
authorization. The authorization information of FTP server includes the top
working directory provided for FTP clients.
Perform the following configuration in the corresponding view.
Table 246 Configure the FTP Server Authentication and Authorization
Operation
Create new local user and enter local User View
(System View)
Delete local user (System View)
Configure password for local user (Local User
View)
Default
FTP server is
disabled.
-
-
-
Command
ftp server enable
undo ftp server
Command
local-user username
undo local-user [ username |
all [ service-type ftp ] ]
password [ cipher | simple ]
password
Description
You can view the
configuration information
of FTP server with the
ftp-server command.
Configure username,
password and authorized
directory for FTP users.
Configure timeout time
value for FTP server.
-