Introduction To Sftp; Ftp Configuration; Ftp Configuration: A Switch Operating As An Ftp Server - 3Com 4500 PWR 26-Port Configuration Manual

files from an FTP server, and stops rotating when the file downloading is finished, as shown in
Figure 57-1.
Figure 57-1 Clockwise rotating of the seven-se gment digital LED

Introduction to SFTP

Secure FTP (SFTP) is established based on an SSH2 connection. It allows a remote user to log in to
switch to manage and tr
since the switch can be
FTP Configuration
Complete the following tasks to configure FTP:
FTP Configuration: A
Switch Operating as an
FTP Server
FTP Configuration: A
Switch Operating as an
FTP Client

FTP Configuration: A Switch Operating as an FTP Server

C reating an FTP user
Configure the user name and password for the FTP user and set the service typ
services, a user must provide a user name
Only users t hat pass th
F ollow these steps to
To do...
Enter system view
Add a local user and enter local
user view
ansmit files, providing a securer guarantee for data transmission. In addition,
used as a client, you can log in to remote devices to transfer files securely.
Task
Creating an FTP user
Enabling an FTP server
Configuring connection idle time
Specifying the source interface and source
IP address for an FTP server
Disconnecting a specified user
Configuring the banner for an FTP server
Displaying FTP server information
Basic configurations on an FTP client
Specifying the source interface and source
IP address for an FTP client
and password for being authenticated by the FTP server.
e authentication have access to the FTP
create an FT P user:
Use the command...
system-view
local-user user-name
server.
57-2
Remarks
Required
Required
Optional
Optional
Optional
Optional
Optional
—
Optional
e to FTP. To use FTP
Remarks
—
Required
By default, no local user is
configured.
a