Interface Managementethernet - Dell Z9500 Command Reference Manual

Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.4.1.0
Example
Dell(conf)#interface loopback 1655
Dell(conf-if-lo-1655)#
Related
interface
Commands
interface null
interface port-channel
interface vlan

interface ManagementEthernet

Configure the Management port on the system (either the Primary or Standby RPM).
Z9500
Syntax
interface ManagementEthernet slot/port
Parameters
slot/port
Defaults Not configured.
Command CONFIGURATION
Modes
844
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
— configures a physical interface.
— configures a Null interface.
— configures a port channel.
— configures a VLAN.
Enter the keyword ManagementEthernet, then the slot
number (0 or 1) and port number zero (0).
Interfaces