Understanding J-Web User Interface Sessions - Dell PowerConnect J-EX4200-24T Software Manual

Related
Documentation

Understanding J-Web User Interface Sessions

Related
Documentation
Understanding J-Web User Interface Sessions on page 133
J-Web User Interface for J-EX Series Switches Overview on page 129
Connecting and Configuring a J-EX Series Switch (J-Web Procedure) on page 163
Configuration Files Terms on page 322
You establish a J-Web session with the switch through an HTTP-enabled or
HTTPS-enabled Web browser. The HTTPS protocol, which uses 128-bit encryption, is
available only in domestic versions of Junos OS. To use HTTPS, you must have installed
a certificate on the switch and enabled HTTPS. See "Generating SSL Certificates to Be
Used for Secure Web Access" on page 398.
When you attempt to log in through the J-Web interface, the switch authenticates your
username with the same methods used for Telnet and SSH.
If the switch does not detect any activity through the J-Web interface for 15 minutes, the
session times out and is terminated. You must log in again to begin a new session.
To explicitly terminate a J-Web session at any time, click
J-Web User Interface for J-EX Series Switches Overview on page 129
Configuring Management Access for the J-EX Series Switch (J-Web Procedure) on
page 395
Chapter 11: User Interfaces Overview
in the top pane.
Logout
133