Fip-Snooping Max-Sessions-Per-Enodemac - Dell S4810 Reference Manual

Parameters
fc-map-value
Defaults 0x0EFC00
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0

fip-snooping max-sessions-per-enodemac

Configure the maximum session limit per ENode MAC address.
S4810
Syntax
fip-snooping max—sessions—per—enode—mac max-sessions-value
To return the configured maximum sessions to the default value, use the no fip-
snooping max—sessions—per—enode—mac command.
Parameters
max-sessions-
value
Defaults 32
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2)
664
Enter the FC-MAP value FIP snooping uses. The range is
from 0EFC00 to 0EFCFF.
CONFIGURATION
VLAN INTERFACE
Introduced on the S4820T.
Introduced on the S4810.
Enter the maximum number of sessions allowed per ENode
MAC address. The range is from 1 to 64.
Introduced on the S4810 and S4820T.
FCoE Transit