Connect The Dut And Execute The Auto Scale; Specify The Electrical Delay - Agilent Technologies E5071C Manual

E5071C

4. Connect the DUT and Execute the Auto Scale

The DUT is connected again as shown in Connect the DUT to execute the
auto scale.
Setup Description
Executing the auto scale

5. Specify the Electrical Delay

The electrical delay is entered to flatten the phase trace.
Setup Description
Entering the
electrical delay
6. Measure the Deviation from a Linear Phase
The statistics data is used to read the deviation from a linear phase (peak-
to-peak).
420
Done
Key Operation
> Auto Scale
Scale
Key Operation
> Electrical Delay >
Scale
or Rotary Knob (Flattening a trace)
keys
Up/Down Arrow