Setting Point Trigger - Agilent Technologies E5071C Manual

Setting Point Trigger

Overview
•
Setting Point Trigger
•
Other topics about Making Measurement
Overview
The point trigger provides a point measurement at every trigger, and it can
be used to change the trigger event to point trigger mode.
Trigger event
name
On Point (On)
On Sweep (Off)
When the trigger source is selected as the internal trigger, the
•
point trigger does not work.
Setting Point Trigger
1. Press
Trigger
2. Click Trigger Event.
3. Click the softkey that corresponds to the desired trigger event.
Softkey
On Point
On Sweep
Function
Point measurement is performed when trigger is
applied.
Measurement is performed for all measurement
points when trigger is applied.
key.
Function
Measures at each measurement point
Measures all measurement points
Measurement
269