Disabling-Enabling Usb Mass Storage Device - Agilent Technologies E5071C Manual

Disabling-Enabling USB Mass Storage Device

You can disable/enable any USB-compatible external mass storage devices
in order to ensure confidentiality or for other reasons.
To disable a USB Mass Storage Device
•
To enable a USB Mass Storage Device
•
To disable write access to USB Mass Storage Device
•
Other topics about Using Windows
To disable a USB Mass Storage Device
1. Press
Save/Recall
2. Press Explorer....and navigate to D:\Agilent\Service.
3. Double-click DisableUsbStorage.exe
4. Click OK in the SUCCEEDED message window that appears. If any
USB mass storage device is connected to the E5071C under this
condition, the Hardware Wizard will start, but the USB mass storage
device will not work.
To enable a USB Mass Storage Device
1. Press
Save/Recall
2. Press Explorer....
3. Double-click EnableUsbStorage.exe from D:\Agilent\Service.
4. Click OK in the SUCCEEDED message window that appears.
5. If you do not want any USB mass storage device to ever be
enabled at any time, delete EnableUsbStorage.exe from the
E5071C after DisableUsbStorage.exe has been completed.
These two programs will not be recovered automatically by
applying the firmware update or other such action. Before
deleting any of these programs, you should make a backup copy
to a recording medium such as a USB memory and store it
separately.
6. If the program fails to run, it is possible that you have not
logged in as a user in the Administrators Group. When you want
to execute any of the above programs, make sure to log in as a
user in the Administrators Group.
To disable write access to USB Mass Storage Device
key.
key.
Using Windows
955