Agilent Technologies E5071C Manual page 893

E5071C
7 Power ON
Issuing the command will clear all bits from the standard event status
*CLS
register.
Status Bit Definitions of the Operation Status Condition Register
Bit Name
Position
0 - 3 Not used
4 Measurement
5 Waiting for
Trigger
6 - 13 Not used
14 VBA Macro
Running
15 Not used
Issuing the command will clear all bits from the operation status
*CLS
event register.
Status Bit Definitions of the Questionable Status Condition Register
Bit Name
Position
0 - 7 Not used
8 Bandwidth Test Fail
(Questionable bandwidth
limit status register
summary)
9
Ripple Test Fail
(Questionable ripple limit
status register summary)
1120
Set to "1" when the E5071C is powered
ON, or when the firmware is restarted.
Description
Always 0
Set to "1" during measurement
Set to "1" while the instrument is
waiting for a trigger.
Always 0
Set to "1" while a VBA macro is
running.
Always 0
Description
Always 0
Set to "1" while one of the
enabled bits in the
questionable bandwidth limit
status event register is set to
"1."
Set to "1" while one of the
enabled bits in the
questionable ripple limit status