Connecting The Dut; Setting The Measurement Conditions - Agilent Technologies E5071C Manual

5. Selecting Measurement Parameters
6. Extending the Calibration Plane
(removing the cause of error)
7. Setting the Port Reference
Impedances
8. Adding a Matching Circuit

1. Connecting the DUT

Connect the DUT to the E5071C by using the instrument's three test ports.

2. Setting the Measurement Conditions

Follow the procedure below to set the measurement conditions. The
measurement parameters for balanced measurements should be set after
unbalanced-balanced conversion. Here, set the measurement parameters
for observing the characteristics achieved during unbalanced
measurements.
Setting Description
Preset for setting
The mixed-mode S-
parameters are selected.
The calibration reference
plane is extended.
The port reference
impedances are specified.
A matching circuit is added.
Key Operation
> OK
Preset
Measurement
423