Agilent Technologies E5071C Manual page 328

1. Select a trace in which you want to enter the equation and activate
the trace.
2. Activating a trace is required as Equation Editor works on
traces.
2. Follow the steps below to enter an equation:
1. Press Display.
2. Click Equation Editor (1 in the figure above). The Equation
Editor dialog box appears.
3. Enter an equation in the equation field (4 in the figure above).
Referring to traces in a different channel is NOT available with
•
Equation Editor on the ENA.
The equation can be entered with the software keyboard
•
enabled by selecting Keyboard... (3 and 3a in the figure
above).
Measurement
327