Searching For The Peak - Agilent Technologies E5071C Manual

Search right
(Search
Right)
Procedure
1. Activate the marker you are using for the target search.
2. Press
Marker Search
3. Click Target > Target Value
4. Enter the target value in the entry area that appears. This causes the
target search to be executed based on the definitions of the newly
set target value and the currently set transition type.
5. Click Target Transition.
6. Select a transition type. This sets the target search to be executed
based on the definitions of the currently set target value and the
newly set transition type.
7. Press the corresponding softkey to move the marker to the target.
When the data format is in Smith chart or polar format, execute
•
the search for the main response value of the two marker
response values.

Searching for the peak

The peak search function enables you to move the marker to the peak on
the trace.
Definition of the peak
Executes the search from the current marker position
to the larger stimulus values and moves the marker to
first target encountered.
key.
Measurement
293