Agilent Technologies E5071C Manual page 446

Display the trigger menu.
2. Set the trigger source to "manual."
Setting Description
Set the trigger source to "manual."
3. Set the trigger mode for channel 1 to "continuous."
Setting Description
Set channel 1 to the active channel.
Set the trigger mode to "continuous."
4. Set the trigger mode for channels 2, 3, and 4 to "continuous"
according to the same procedure as in Step 3.
5. Execute the measurement.
Setting Description
Generate a trigger event.
6. Repeat the following procedure to execute auto scale for all of the
channels.
Setting Description
Set the active channel.
Execute auto scale.
Trigger
Key Operation
Trigger Source > Manual
Key Operation
Channel Next
Continuous
Key Operation
Trigger
Key Operation
Channel Next
> Auto Scale
Scale
Measurement
445