Useful Functions When Using A Mouse - Agilent Technologies E5071C Manual

E5071C
List State
5. Enter each item in the following table for each added segment (line)
to create the segment table. To create the segment table, use the
hardkeys and softkeys.
Start
Stop
Center
Span
Points
IFBW
Power
Delay
Sweep
Mode
Time
State

Useful functions when using a mouse

By right-clicking on the selected cell, you can use the following shortcut
menu.
Shortcut Function
Copies the value in the selected cell into the clipboard (internal
Copy
temporary storage memory)
390
Toggles ON/OFF the state of each segment; the row for
setting (State) only appears in the segment table when this
is ON
Sets the start value of the sweep range
Sets the stop value of the sweep range
Sets the center value of the sweep range
Sets the span value of the sweep range
Sets the number of points
Sets the IF bandwidth
Sets the power level; the power range is common to the
settings for the linear/log sweep
Ranges)
Sets the sweep delay time
Sets the sweep mode; you need to select one of the
following items:
STEPPED: Stepped mode
SWEPT: Swept mode
Sets the sweep time; to specify the auto setting (AUTO),
enter 0 as the sweep time
Sets the state of each segment
(Sweep Setup key > Power