Agilent Technologies E5071C Manual page 894

10 Limit Test Fail
(Questionable limit
status register summary)
11 - 15 Not used
Status Bit Definitions of the Questionable Status Event Register
Bit Name
Position
0 - 7 Not used
8 Bandwidth
Test Fail
(Questionable
bandwidth
limit status
register
summary)
9 Ripple Test
Fail
(Questionable
ripple limit
status
register
summary)
10 Limit Test
Fail
(Questionable
limit status
register
summary)
11 VBA Macro
Interrupted
event register is set to "1."
Set to "1" while one of the
enabled bits in the
questionable limit status event
register is set to "1."
Always 0
Description
Always 0
Set to "1" when a transition of the
condition register occurs if the transition
filters are set as valid values.
Set to "1" when a transition of the
condition register occurs if the transition
filters are set as valid values.
Set to "1" when a transition of the
condition register occurs if the transition
filters are set as valid values.
Set to "1" when a VBA macro is
interrupted by one of the following
reasons.
Occurrence of an execution error
Executing "End" statement in the VBA
Programming
1121