Agilent Technologies E5071C Manual page 368

A = Result of the calculation of sweep averaging for the nth sweep
•
n
operation at the point in question (a vector quantity)
S = Measurement value obtained at the nth sweep operation at the
•
n
point in question (a vector quantity)
F = Sweep averaging factor (an integer between 1 and 999)
•
Define the sweep averaging by following the steps below.
1. Press
Channel Next/Channel Prev
you want to define the sweep averaging.
2. Press key.
Avg
3. Click Avg Factor, then change the averaging factor in the data entry
area.
4. Click Averaging to turn ON the averaging.
5. Clicking Averaging Restart resets n to 1 in Sweep Averaging
equation in Turning on Sweep Averaging
keys to select the channel on which
Measurement
367