Agilent Technologies E5071C Manual page 445

E5071C
Setting Description
Select full 2-port calibration.
Select the port and execute the calibration.
5. Perform calibration for channels 2, 3, and 4 according to the same
procedure as in Step 2 to Step 4.
Because the test port assignment setting for channels 1 and 2
•
and that for channels 3 and 4 are the same, you need not
change the ECal connection.
9. Connecting DUT
Connect the DUT as shown below.
10. Executing Measurement
1. Display the trigger menu.
Description
444
Key Operation
Key Operation
2-Port ECal
1-2