CALCulate:STATistics:SCALe:AUTO ONCE
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
CALCulate:STATistics:SCALe:X:RLEVel –130dBm to 30dBm
Specifies the reference level for the X-axis of the measurement display. The setting is identical to the
reference level setting using the command DISPlay:WINDow:TRACe:Y: RLEVel.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
CALCulate:STATistics:SCALe:X:RANGe 10dB to 200dB
Specifies the level range for the X-axis of the measurement display. The setting is identical to the level
range setting defined with the command DISPlay:WINDow:TRACe:Y:SCALe.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:CALCulate[1]:STATistics:SCALe:AUTO ONCE
CALC:STAT:SCAL:AUTO ONCE
FSP, FSU
:CALCulate[1]:STATistics:SCALe:X:RLEVel <ampl>
:CALCulate[1]:STATistics:SCALe:X:RLEVel?
CALC:STAT:SCAL:X:RLEV –60dBm
CALC:STAT:SCAL:X:RLEV?
FSP, FSU
–20dBm
Saved in instrument state.
–130
30
:CALCulate[1]:STATistics:SCALe:X:RANGe <rel_ampl>
:CALCulate[1]:STATistics:SCALe:X:RANGe?
CALC:STAT:SCAL:X:RANG 20dB
CALC:STAT:SCAL:X:RANG?
FSP, FSU
100dB
Saved in instrument state.
10
200
Compatible SCPI Commands
Supported SCPI Commands
99