E5071C
Device Test
Limit
Limit test
test
table
Offset
Creating a
table by
using the
GPIB
command
Reading the
results
Ripple test
Bandwidth test
922
8753ES
One per channel
•
Number of segments:
•
Up to 18 per table
Definable
Create a table by using two
or more commands
Per channel, Per
•
segment
Pass/fail at each point,
•
Number of points per
•
segment that failed
the
maximum/minimum,
Stimulus value at a
•
failed point
Available
Available
E5071C
One per trace
•
Number of
•
segments: Up to
100 per table
Definable
Create a table by
using one command
Pass/Fail of the
•
active trace on
each channel
Number of failed
•
points
Stimulus value
•
at a failed point
Available
Available