Date And Time - Agilent Technologies E5071C Manual

service mode and does not return to normal operating mode, there is
a possibility that the instrument is out of order.
SVC An abnormal condition has been detected inside the E5071C. The unit
(displayed in may be damaged. Notify the Customer Contact listed at the end of
red) this manual or the distributor from whom the unit was purchased.
SVC The E5071C is in normal mode.
(displayed in
gray)

4-8. Date and Time

Displays the date and time generated by the internal clock. The display
format is as follows:
YYYY-MM-DD HH:MM
Where:
YYYY: Year (AD)
MM: Month
DD: Day
HH: MM: Time (0:00 to 23:59)
You can turn the date and time display on/off by:
•
Setup > Clock Setup > Show Clock.
Quick Start
> Misc
System
49