Pastes the value data in the clipboard to a newly selected cell
Paste
Adds a new line above the selected cell
Insert
Deletes the line containing the selected cell
Delete
In the character-by-character edit mode, you can also use the following
shortcut menu.
Shortcut
Function
Undoes the change and restore the value before the change
Undo
Cuts the selected string and store it into the clipboard
Cut
(temporary memory)
Copies the selected string into the clipboard
Copy
Pastes the string in the clipboard to a newly selected cell
Paste
Deletes the selected string
Delete
Selects the entire string in the cell
Select All
Executing segment sweep
To execute a segment sweep by using the segment table you have
created, you must specify the sweep type for that sweep operation by
following the steps below.
1. Press
Channel Next
you will execute the segment sweep operation.
2. Press
Sweep Setup
3. Press Sweep Type > Segment.
Setting up the segment display
Define the method of displaying traces when the segment sweep is
executed by following the steps described below.
1. Press
Channel Next
you will define the segment display.
2. Press
Sweep Setup
3. Click Segment Display.
4. Select the segment display.
Softkey
Channel Prev
/
Key.
Channel Prev
/
Key.
Function
keys to select the channel on which
keys to select the channel on which
Measurement
391