Target And Transition Types; Executing A Target Search - Agilent Technologies E5071C Manual

Hide thumbs Also See for E5071C:

Table of Contents

The target search is a function that searches for a target that matches the

pre-defined target value and transition type(s) (positive, negative, or both

positive and negative) and then moves the marker to that target.

Target and Transition Types

A target is a point that has a specific measured value on the trace. Targets

can be divided into the two groups shown below depending on their

transition type.

Transition type:

Positive (Positive)

Transition type:

Negative (Negative)

The following three methods are available for executing the target search:

(Search Left)

When the value of the target is larger than the

measured value that immediately precedes it (on

the left side)

When the value of the target is smaller than the

measured value that precedes immediately it (on

the left side)

The marker moves to the peak with maximum response

value if the peak polarity is Positive or Both or to the

peak with minimum response value if the peak polarity

is Negative.

Executes the search from the current marker position

to the smaller stimulus values and moves the marker to

first target encountered.

Show Quick Links

Table of Contents